Parts

• Perforated leather top • Ti/CrN rails • 290 grams

The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Threaded cap / nut for axle installation - Cap nut and O-ring included - Use with drive-side plates

• Aluminum hub body with hollow steel axle • Fixed/Free • Sealed bearings • 120mm or 130mm rear spacing • 32 hole • 282 grams

The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single

The 612 Track Crank is an extremely stiff and strong 144mm BCD track crank. It’s at home as much on the busy avenues of your city as it is on the boards of the velodrome. All-City sweats the details, so the 612 (Minneapolis’ area code) is cold-forged, resulting in a tight grain structure. The upshot is that it’s strong, which means more riding and less worries for you. It utilizes the classic JIS square taper spindle and comes with a color-matched, 46-tooth, 1/8th chainring.  - Recommended Spindle Length: 110mm - Spindle Interface Type: square taper JIS - Bolt Pattern: 5-bolt - BCD: 144mm - Chain Compatibility: 1/2-inch x 1/8-inch - Weight: 726g w/ ring and bolts - Bottom bracket and retaining bolts not included

The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Measurement: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brakes: Mid Reach

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. The splined freehubs have 28 points of engagement, the XD driver has 56. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity. - Weight: 277g - Includes 12mm thru-axle end caps and quick release skewer - Drive Side Center To Flange 18.5mm - Non-Drive Center to Flange 34mm - Non-Drive Flange Diameter 58mm - Drive Side Flange Diameter 49mm

Featuring a custom fork crown and elegantly curved blades inspired by classic randonneuring forks, the All-City Space Horse Fork comes outfitted with four-pack rack mounts to accept a variety of front rack styles. Signature fork ends accommodate 12mm thru-axles and flat-mount brakes, E.D. coating offers protection from rust, and a liquid black paint finish adds shine to its timeless silhouette. - 100% 4130 Chromoly tapered blades and matching signature fork ends - Custom-designed lugged fork crown, four-point rack mounts, stealth dynamo routing - 700c x 45mm maximum tire clearance; 41mm with fenders Specifications: - Brake Mount (Fork): Flat Mount 160 - Wheel Size: 700c - Brake Type: Disc - Crown Race: 30.0 - Steerer Type: Straight - Offset: 52 - Material: Steel - Steerer Tube Length (mm): 350 - Maximum Tire Clearance (Fork): 700c x 45mm or 650B x 47mm - Front Axle: 12mm Thru x 100mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Front Hub Spacing (mm): 100 - Axle to Crown Length: 395

Featuring All-City’s first fully custom lugged crown, the versatile, cross-inspired Super Professional Fork is right at home on mixed terrain. Designed to provide a fast, agile, and responsive ride, it offers durable steel construction, crown and mid-blade rack mounts for a rack and fenders, 45mm rake, compatibility with flat-mount brakes, and clearance for 700c x 45mm or 650b x 47mm tires. The entire fork is E.D. dipped for rust proofing, with a nice black powdercoat over everything. - Steel construction, lugged crown - Crown and mid-blade rack mounts - 45mm rake - Accommodates 12mm thru-axle and flat-mount brakes - Max tire clearance 700c x 45mm or 650b x 47mm - Thru-Axle included

- External lotion designed to maximise training & recovery - Natural bicarb electrolyte that improves muscle function & combats fatigue - Clean sport compliant - Made in the USA

The Inverse stem features a CNC'd 6061 aluminum construction with a brushed anodized finish. - Stem Type: Top Load

Brake pad spreader tool for Avid Elixir brakes.

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.