Pumps/Inflation

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Lightweight and easy to use, MSW’s Jetstream adjustable inflator head works with all 3/8" threaded inflation canisters and allows you to vary the CO2 flow to avoid overfilling your tires. - Adjustable airflow with a convenient shut-off feature - Easily pushes onto Presta or threads onto Schrader valve tubes - Knurled knob for reliable grip even with mittens or gloves - Kit comes with two 20g cartridges

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount

- CNC machined aluminum barrel provides a strong, durable body with best-in-class design - Extendable hose with threaded valve help user pump easily and confidently - Roller system valve head eliminates the need to twist the pump as user threads onto the valve - 160psi rating

The Gravel Digital Drive is a high-quality bike floor pump with a medium-sized barrel designed specifically for gravel bikes and other mid-volume tires. The chuck is tubeless specific and “flips” for Presta, or a threaded Presta shaft (with the valve core removed) to provide more airflow for seating tubeless tires. Its barrel and piston are built from high-grade, durable steel and mounted to a rugged Composite Matrix base. Pumping is versatile and more efficient thanks to an extra-long hose and a larger 3.5” (88.9 MM) digital gauge, which provides precise measurement up to 100 PSI (6.9 BAR). And its classic wood handle is stylish and very comfortable to use. The Gravel Digital Floor Drive is built in-house, 100% quality controlled and fully rebuildable for long-lasting operation. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (100 psi / 6.89 bar) - Extra-long nylon-reinforced braided hose with aluminum couplers - Varnished wood handle - ABS1 Pro with Presta / valve stem chuck

The Gravel Digital Drive Pro is the ultimate bike floor pump with a medium-sized barrel designed specifically for gravel bikes and other mid-volume tires. The chuck is tubeless specific and “flips” for Presta, or a threaded Presta shaft (with the valve core removed) to provide more airflow for seating tubeless tires. Its barrel, piston and base are meticulously machined from premium aluminum and complemented by a comfortable, stylish wood handle. Pumping is versatile and more efficient thanks to an extra-long hose and a larger 3.5” (88.9 MM) digital gauge, which provides precise measurement up to 100 PSI (6.9 BAR). The Gravel Digital Floor Drive Pro is built in-house, 100% quality controlled and fully rebuildable for long-lasting operation. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (100 psi / 6.89 bar) - Extra-long nylon-reinforced braided hose with aluminum couplers - Varnished wood handle - ABS1 Pro with Presta / valve stem chuck

Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.

The Pressure Over Drive is a floor pump with an integrated system designed to seat tubeless tires. This offers tubeless tire users a portable alternative to air compressors and eliminates wasting CO2 cartridges. It features a secondary chamber that can be manually pressurized and then released with the integrated foot-lever. This provides a strong, continued blast of air capable of seating road, mountain and plus-sized tubeless setups. It’s built for durability and reliability with its steel and aluminum construction, and its aesthetics are enhanced with a comfortable, stylish wood handle. The Pressure Over Drive has a 220psi (15 bar) pressurizing limit, with a built-in safety release in the event of over inflation. It comes equipped with an extra-long, nylon-reinforced braided hose and our Presta/Schrader-compatible ABS2 chuck. It can also be used as a regular floor pump. - ABS2 equipped

Get back on the road fast with Control Blast 0. Featuring a reversible head for Presta & Schrader with a valve knob which unwinds to apply just the right amount of pressure. Features - Easy fill rate control knob - Threaded Presta and Schrader valve compatible system - Alloy construction - Head only (cartridge not included) - Compatible with threaded cartridges

Giant's Control Blast 1 CO2 Inflation Kit consists of an inflator head that fits Presta valves, a cartridge sleeve, and a 16-gram CO2 threaded cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.

- Foam padded cartridge provides insulation - Large volume makes filling big tires quick and easy

- Thumb control keeps thumb safe from cold air - Ergonomic design ensures accurate valve pressure - Simple push-on feature activates air cartridge - Includes 1, 16g threaded co2 cartridge - Presta and schrader valve compatible system - Compatible with threaded and non-threaded cartridges

INSTANT SOLUTION Efficiency and convenience are two key feature that Giant mini pump pursuit. The Control Mini+ pump with several refined technologies from handle material to inner structure design, provide you immediately inflate solution. Features - Durable alloy barrel - Tactal off-road grip handle design and comfort - Longer stroke design creates more volume per pump - Extendable hose with a threaded valve for Presta and Schrader use - 120psi Max pressure - Includes mounting bracket

Classic shock. The new Control Shock 1 features a classic 1.6” analog classic design with 400psi maximum pressure. Two-stage valve technology ensures that you won’t lose air when disconnecting the pump. And our extended valve head design makes it easier to access tight valve locations. Features - CNC machined aluminum barrel - Aluminum housing and gauge - 1.6” diameter pressure gauge - Air pressure release button - Extended Valve Head Design - Two Stage Valve - 400psi Max

Giant's Control Mini MTB+ Pump boasts a lightweight, durable CNC-machined aluminum barrel that's a large diameter so that it can pump up even the widest mountain bike tires quickly. Plus, this mighty mini features a hose that makes pumping easier, hides inside for a clean look, and works on all valve types.

Giant's Control Mini Road+ Pump boasts a lightweight, durable CNC-machined aluminum barrel made to pump up high-pressure road bike tires quickly. Plus, this mighty mini features a hose for easy, confident inflation which hides inside for a clean look and works on all valve types.

LESS IS MORE. The Giant Control Tower 2 is a great pump choice. A durable structure provides stability during use, remove the surplus function provides better efficiency with fewer strokes to fill your tires. The proven AutoHead is compatible with most common tire valves and the large 3-inch gauge makes it easy to read up to 180psi. - Easy-to-read 3.0" base mounted analog gauge - Comfortable handle with solid steel barrel design - AutoHead design - 180psi rating

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Giant tire levers

Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors. - Card of 12 - Construction: aluminum - Airtight O-Ring Seal/Screw On

The Digital Shock Pump gives you an exact pressure setting to make suspension and seatpost setup easier and repeatable every time. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - LCD display panel - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder and foldable hose

High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.