Jena Hybrid has a carbon monocoque frame and fork. The frame’s geometry is similar to the Jena, offering a performance endurance ride combined with a comfortable ride position for long hours spent in the saddle.
The Jena Hybrid features traditional components like hydraulic disc brakes, 11 speed transmission and carbon or aluminium rims. The only component added to the traditional configuration is the rear hub containing the 40 Nm Ebikemotion motor to assist pedaling.
The motor is powered by a 250 Wh battery perfectly integrated inside the frame’s down tube. System control (on, off and monitoring) is controlled by the iWoc button installed on the handlebar, allowing the rider to choose Jena Hybrid's various assistance modes.
There are practically no limits on Jena Hybrid’s usability and to the available configurations. The clearance between frame / fork and wheels allows you to install generously sized tires on 28” wheels or 650B MTB wheels. With 28” wheels you can install tires up to 44 mm wide, whereas with 650B MTB wheels, you can install 48 mm wide tires, equivalent to 1.95” (tested on Vittoria tires). There are numerous available supports that allow the installation of bottle holders, bags, carriers and mudguards. On the front fork, for example, you can install two bottle holders or one lowrider carrier for bags.
Rear Derailleur SHIMANO GRX RD-RX812
Crank SHIMANO GRX FC-RX600 40T
Shifters SHIMANO GRX ST-RX400
Cassette SHIMANO CS-M8000 11-42T
Chain SHIMANO CN-HG601
Brakes SHIMANO GRX BR-RX400
Frame CARBON MONOCOQUE NH-MOD
Fork CARBON MONOCOQUE NH-MOD
Headset FSA MR137 TAPERED 1"1/8 TOP - 1"1/4 BOTTOM
Stem RITCHEY COMP
Handlebar RITCHEY ERGOMAX ROAD COMP
Saddle SELLE ITALIA X3 BOOST
Rims WILIER TRIESTINA HY-AIR38KC-EU CARBON
Tires CST PIKA 700X38 MM
Disk Rotors SHIMANO SM-RT70 160 MM CENTER LOCK
Motor MAHLE EBIKEMOTION X35