Other
$15.00
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps
$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis?
Well, boy howdy do we have just the thing...
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware
$50.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Threaded cap / nut for axle installation
- Cap nut and O-ring included
- Use with drive-side plates
$23.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$64.00
Essential parts to properly service and maintain all Avid CODE brakes.
- Replacement parts for 2011-2016 CODE brakes
- Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
$14.95
- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height
- Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers
$19.99
Box Two Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards.
$29.95
- CNC-machined 6061-T6 aluminum with titanium hardware
- Zero-friction cam surface treatment ensures smooth lever action
- 27g
$4.99
- Soft foam grip donuts prevent thumb blisters from riding gloveless
- Intended for use with flanged BMX grips to prevent rubbing and irritation
$6.99
- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel
- Attaches to rear cable guide and routes two cables around seat post
$8.99
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
$8.99
- Cable hanger and straddle cable
- Alloy construction
- Anodized finish
- Great for Canti and U-Brakes
$9.99
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack
$11.99
- Alloy 1-1/8" seatpost clamp
- Double clamp design for extra holding power on BMX bikes
$11.99
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"
$39.99
- Aluminum cups w/ steel hardware
- Converts a non-threaded 68mm American BB shell to use an English-threaded Euro BB
- Shell: 68mm
- Interface: American
- Spindle Type: Euro
- Cup Material: Alloy
- Weight: 104g
$8.95
- Compatible with Super Record, Record, and Athena EPS systems
- Required for use with the charger and works with V2 systems
- USA/North America plug - adapters required for other countries
$8.95 - $10.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$11.95
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
- Fits external seat post diameters from 30.9 - 31.6mm
- Not compatible with the V2 Power Unit
$16.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
- Not compatible with the V3 Power Unit
- Required for external mounting of V2 Power Unit
$22.45
Campagnolo EKAR disc brake adapters.
- Includes bolts
$23.95
Campagnolo EKAR disc brake adapters.
- Includes bolts
$28.45
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
- For mounting the V3 power inside the seat tube using the water bottle screws
- Not compatible with the V2 Power Unit
Page 1 of 33
Next page