Parts

iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.

iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

- Lower slider replacement parts for E-13 chainguides

- Service parts for E-13 chainguides

- Stainless steel chiainring/spider lockring for all e*thirteen cranks that use the Quick Connect Direct Mount System - Requires e*thirteen spider lockring tool. Use QBP part # TL0212

- Spider removal tool is compatible with all e*thirteen cranks that have a removable spider, and can also be used as an installation/removal tool for e*thirteen bottom brackets

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"

- Bottom brackets for e*thirteen XCX, TRS, and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit) - 7075-T6 black anodized cups with custom angular contact bearings - One year no questions ask - Model: EXA+ - Interface: P3 Connect - Shell: English - For installation of BSA bottom brackets, use e*thirteen BB tool (included with cranksets) or a 1-3/4" 12 point socket

The e*thirteen e*spec Plus Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These alloy crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self-extractor bolt is built into both arms for easy removal - 6061 Aluminum - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"

- Adjustable wearplate with chainring size indicators allow for 28-38T chainring capacity and easy adjustment - Gen 2 Stealth Idler pulley for smooth and quiet operation - 28/30, 32/34, 36/38t direct mount bashguard included - ISCG-05/BB models include ISCG-05 to BB adapter plate - 136g (30t), 159g (34t), 167g (38t) - Range: 28-38t

The e*thirteen XCX+ is a lightweight and durable cassette that offers excellent range, and is compatible with both SRAM and Shimano drivetrains. - 10 steel cogs and 1 aluminum cog provide durability - Ultra-stiff cluster keeps power at the wheels - 378% range - Compatible with Shimano and SRAM drivetrains - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-11-13-15-17-19-21-24-27-30-34 - Drivetrain Speeds: 11 - Designed for ebike: Yes - Color: Black - Weight: 271 g

The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard. - 511% range is great for modern 1x drivetrains - 10 steel cogs, plus 1 aluminum cog increase durability - Saves weight by using smaller chainrings and shorter chains, which also provides better ground clearance - Designed for use with eBike drivetrains - Compatible with Shimano and SRAM drivetrains - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-10-12-14-17-20-24-28-33-39-46 - Drivetrain Speeds: 11 - Color: Black - Weight: 390 g

The e*thirteen e*spec Race Carbon Crank Arm Set is designed to work with Bosch Gen 4 eBike motors. These carbon crank arms offer a slim Q-factor and smaller overall profile, while keeping e*thirteen's proven crank technology at the forefront. - An 8mm self extractor bolt is built into both arms for easy removal - World-Cup DH-rated layup and construction - Compacted carbon fiber with an additional 3k added to front and rear faces of crank for impact resistance - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 150/157 Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Designed for ebike: Yes - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount Bosch - BB Included: No

The e*thirteen XCX Race crankset offers ultra-lightweight construction and uncompromising strength. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - Designed to be used with e*thirteen's ultra-lightweight UL Guidering (30-42t) for optimal weight savings - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs , 141/148 Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

absoluteBLACK single speed cogs feature a unique tooth shape, narrow-wide profile, and perfect roundness. Crafted with CNC machined 7075 aluminum with an anodized finish for long-lasting construction. - Tooth design is wider and more "square-like" compared to other single speed cogs - The narrow-wide profile provides additional strength and offers greater chain retention - Compatible with 1X, 6, 7, 8, 9, 10, 11, and 12-speed chains - To utilize the narrow-wide feature, use a 9, 10, 11, or 12-speed chain - Not compatible with half-link chains - Compatible with Shimano HG cassette bodies

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames. No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame. Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat). Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security. - Mass/Size: 11.6g / one size fits all - Compatibility: All braze-on frames and derailleurs. - Adjustability: 6mm chainline adjustment provided on the slot for precise setup - Material: CNC machined 7075 T6 / M5 stainless steel bolt - Finish: type II anodizing

World's first pliable hot melt chain wax formula with Graphene for use in crockpots is here. GRAPHENwax—Super pliable, non-crumble, quiet, clean and extremely easy to break-in formula. It exhibits excellent dirt protecting capabilities and durability while maintaining impressively low friction for a prolonged period of time in dry and mixed conditions. It's the easiest wax to break-in after chain cools down—simply hold your chain in one hand and run it between two fingers of your free hand (as per our video) and job done—no more solid sticks or backpedaling issues. Our wax doesn't crumble, chip or leave any marks thanks to our proprietary formula. It's everything you wished for in a hot melt wax. Perfect for Road, Triathlon, Gravel, Mtb and E-bike. Keeps your drivetrain spotless clean. Can be used along with GRAPHENlube. It's the most quiet hot melt wax you will ever use. Unlike other Hot Melt waxes, GRAPHENwax not only exhibits lowest friction, but also lasts longer and is much easier to use. Usually after dipping the chain in melted wax you need to wait until chain cools down and then painstakingly break every chain link so the chain can be flexible again, leaving crumbled mess behind and particles on the frame and crank. With GRAPHENwax, we have reinvented this process. After the chain cools down, you only need to run it between your fingers along its entire length, and the chain is broken-in leaving no pieces of wax behind. Our wax simply doesn't crumble during the chain movement, meaning you have more wax that protects the drivetrain for longer. It can also withstand those hot days where other wax lubricants simply melt off your chain. GRAPHENwax will not stain your fingers when handling the chain and it's the quietest wax coating you will use. It's your "dream come true" wax lubricant. GRAPHENwax and our World Tour winning GRAPHENlube go very well together. If you plan longer rides you can "top it up" with GRAPHENlube. Chain will not require re-cleaning. Why we don't use Tungsten Disulfide (WS2) nor Molybdenum Disulfide (MoS2) additives. While these substances can exhibit super-low friction, they do it only in vacuum or inert gas. In normal humid air they not only have high friction but also very short life because of the rapid oxidation process. Using these additives in chain lubricant, where water is often present, is simply pointless. We also don't use any oils or paraffin oils in the mixture because it adversely impacts the friction. - 340g / 12 oz . +/- 4%. Each box contains 4 "squares" - Wax is black, but on the chain looks transparent. Doesn't leave marks. - Hydrocarbon waxes containing special mix of high-purity graphene. It does not contain any harmful solvents.

absoluteBLACK Silver Series Oval 110 BCD Chainrings feature many of the same benefits as absoluteBLACK's Premium line, but with less material machined out on the outer side, allowing for easier maintenance and cleaning. They are designed for Shimano 4-bolt cranks, such as Dura-Ace 9000, Ultegra 6800, 105 5800, and others. Optimized with smooth shifting in mind, these chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Designed for your winter/training bike where weight is not an issue but ease of cleaning is - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing