Parts & Accessories

Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors. - Card of 12 - Construction: aluminum - Airtight O-Ring Seal/Screw On

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)

Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.

Upgrade any pump to the TwinHead pump head.

- Ball-inflating needle for footballs, basketballs and more

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

• Secures frame pump to frame • Nylon • Also good for use as a watch band

- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

Replaces worn end on any pump hose. - Head Type: Schrader

• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps

The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.

The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.

Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

Bag of 3 replacement washers for EVA heads on all SKS floor pumps

Head Washer for 2371 Head

Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!

Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.

Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads. Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!

Smaller Head fits every known Disc wheel made. Includes Prestacycle's newest version of the Mini Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for any Presta application. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. Deep head adapts to a wide variety of applications including valve extenders. The head is now very easy to get on and off. This head is a MUST for Tubeless tire users. Allows high-flow inflation with the valve core removed for seating tires. PUSH on / PUSH off – the fastest way to get you going. Made with nickel-plated 6061-T6 alloy – Strong as Brass and only 1/3 the weight. It’s also compatible with Silca pumps and can be adapted to other pump brands with our optional Schrader barb or our floor pump replacement hose. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.

Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.

- Attaches to air compressor to inflate tires in seconds - Designed with a variable rate trigger and a large, easy to read gauge - Spin-on Presta head with pressure release option and USA-made hose are included with Prestaflator - Prestaflator PLUS includes Schrader head and blower tip - Attachments are 6061-T6 alloy

Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

Upgrade or replace your hose! Prestacycle's red hose is made in USA from reinforced polyurethane and is 3X more flexible than their previous black hose. New Quick-Click2 + Spin-on head. 300 psi working pressure, 13 inches length. Uses standard 1/4" threads. Smooth alloy clamps for comfortable use of the spinner head and corrosion resistance. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -90° to +175°F. Fits all previous Prestaflator tools, o-ring included.

- Allows you to upgrade floor pumps to accept Prestacycle attachments - Spin-On presta head with pressure release option, USA-made 36" hose and hose clamp are included

Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.

Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.

Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.

If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike. - Designed with a low pressure range of 2-15 psi specific for fat bike tires - Durable case and crystal lens - Retains reading until reset - White face plate for easier reading - Compatible with Presta valves with removable core - Presta/Schrader adaptable head - Length: 120mm - Weight: 101 grams

Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps - Dual head with hose - Will work with any floor pump Planet Bike has made except for Air Supreme

Replacement head and hose for current Domestique or Prestige floor pumps. - Can be retrofit to older Domestique and Prestige by swapping insert from old hose. - Dual presta/schrader head with thumb-lock lever.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Angled Presta valve adapter - Designed for disc wheel use

- Everything you need for a quick fix on the road - 3 tire levers - Patch Kit - 9-function multi-tool - CO2 inflator with 2 16g CO2 cartridges - Seat bag

350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.

- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps

Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.

Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.

Lezyne's Digital Check Drive is an innovative, compact digital pressure gauge. Composite matrix construction with integrated, low-profile Digital Strip Gauge. Machined aluminum head with flip-style Presta or Schrader valve compatible chuck. Super portable, highly accurate system. - Max: 350 psi/24 bar

Bringing Lezyne's Metal Kit along is the difference between being stranded and making it home. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a waterproof aluminum box that fits neatly in a seat bag, jersey pocket or hydration pack.

This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.

Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.