Accessories/Parts

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

Thru-axle adapter for the Kuat TRIO rack.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.

Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Pair of EndCaps for Yakima CoreBar.

Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty

Hardcore adventurers like keeping things safe on the road. EXO LitKit ensures you are street-legal when using the Yakima EXO System. Simply attach to the EXO SwingBase arms to keep your license plate and taillights visible, no matter your configuration. - Keeps your lights and license plate visible while on the road - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Tool-less install onto the EXO SwingBase arms - Attachment points allow EXO LitKit to rotate down and out of the way to easily switch between EXO Accessories - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - 2 Year Warranty - Not intended to remain installed when Swing plate arms are closed - For EXO SwingBase only Product Specs: - Weight: 5.00 lbs. - Dimensions: L 24.50 in x W 50.00 in x H 10.00 in - Limited Two Year Warranty

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required

Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.

Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Custom Landing Pads to install directly to the factory mounting points on raised rails of the 2020+ Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs: - Weight: 0.60 lbs. - Limited Lifetime Warranty

There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.

No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

SafetyMate ensures you are street-legal when using the StageTwo and StageTwo +2. Keep the clean lines and style of the StageTwo family going with the clean LED Lightbar and internal electrical routing. Safety never looked so good. PRODUCT DETAILS - Keeps your lights and license plate visible while on the road? - Attachment points allow SafetyMate to be visible while StageTwo is in use as well as folded up - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - Wiring is internally routed through StageTwo and StageTwo +2 for a clean look - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Compatible with StageTwo and StageTwo +2

Yakima's Side Loader Brackets are permanently side-mounted brackets that fit in the space between the top of your truck and the side window. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).